Job Title: Epitaxy Equipment Senior Technician Company: OSRAM Opto Semiconductors (Malaysia) Sdn. Bhd., Penang SAP Module: SAP PM Roles & Responsibilities: Your new responsibilities * Responsible for the performance of Analytic & Metrology tools such as photo luminescence, Prober, Candela, XRD and other associated support tools in fab/fabrication. * Performing machine schedule maintenance activities in clean room and sub facility with closure SAP PM timely without any safety and quality issue. * Sustain the running of the equipment, daily monitoring of all machine & process parameters and addressing line operation issues, ensure the uptime of the equipment with establish and implement preventive maintenance.Perform troubleshooting of tool software and hardware part with application of measurement systems, daily SPC buyoff, also need to assist engineer's tasks in manufacturing and also development environment. * Transfer and start-up of new equipment, set-up procedure, hook-up, buy-off and qualification of new equipment together with process engineer as team, ensure processes and equipment are compliance to EHS policy. Support and perform continuous improvement project to identify equipment development potential, and support development activities together with engineers. * Maintain good 5S, maintenance work quality and safety, carrying out all task compliance to EHS and safety regulations with high sensitivity on safety requirement. Work Location: Kulim, M02, Malaysia Availability: Full time
Job Title: Material Coordinator Company: PROTEA TECHNOLOGY SDN BHD SAP Module: SAP PM Roles & Responsibilities: Material & Supply Chain Management : * Strong ability to coordinate with: Maintenance team / Planner / Operations / Procurement & vendors * Acts as central focal point for material readiness Monitoring & Tracking : Problem Solving & Work Execution Support : * Ability to resolve material issues quickly to avoid job delays * Supports maintenance execution through timely material availability * Adherence to material management procedures and policies * Awareness of approved supplier lists and procurement governance * Plan, coordinate and supervise onsite materials management activities including ensuring material availability, accuracy of material data/record, preservation of resources, proper surplus/scrap management and material disposal to meet project Work Location: In person Work Location: Kuala Lumpur, M14, Malaysia Availability: Full time
Job Title: SAP Plant Maintenance Consultant - AMS Company: Hiree SAP Module: SAP PM Roles & Responsibilities: Job Description: SAP PM (Plant Maintenance) – Application Maintenance Support We are seeking an SAP PM Application Maintenance Support Specialist to provide ongoing production support, incident resolution, and minor enhancements for the SAP Plant Maintenance module. This role is focused on keeping the system stable and running smoothly for end users post-implementation, rather than new-build configuration — ideal for someone who enjoys troubleshooting, root-cause analysis, and continuous system improvement in a live production environment. Key Responsibilities Provide day-to-day L1/L2/L3 production support for the SAP PM module, resolving incidents within agreed SLAs Monitor, triage, and resolve tickets related to maintenance notifications, work orders, equipment master, functional locations, task lists, and maintenance plans Perform root-cause analysis (RCA) for recurring issues and implement permanent fixes or workarounds Support scheduled and unscheduled maintenance plan runs (batch jobs), background job monitoring, and troubleshooting of failed jobs Manage master data corrections and mass data changes (equipment, functional locations, BOMs, task lists) as needed Coordinate with cross-functional teams (MM, PP, FI/CO, PS) to resolve integration-related issues affecting PM processes Support period-end and year-end activities related to maintenance orders and settlements Maintain support documentation: known error database (KEDB), SOPs, FAQs, and root-cause logs Participate in on-call/rotational support as required, including handling P1/P2 critical incidents Support periodic system health checks, data consistency checks, and housekeeping activities Track and report support metrics: ticket volumes, SLA adherence, aging, and recurring issue trends 2 years of experience in SAP PM support (implementation experience is a plus, but not mandatory) Understanding of incident, problem, and change management processes (ITIL exposure preferred) Experience supporting SAP S/4HANA Asset Management environments Experience working in a managed services / AMS (Application Maintenance & Support) model Industry background in manufacturing, utilities, oil & gas, or facilities management Familiarity with batch job scheduling and monitoring in SAP Understanding of transport management (moving CRs through DEV → QA → PROD) Comfortable working in rotational/on-call support models Work Location: In person Work Location: Kuala Lumpur, M14, Malaysia Availability: Full time
Job Title: SAP Plant Maintenance - Application Support Company: Hiree SAP Module: SAP PM Roles & Responsibilities: Job Description: SAP PM (Plant Maintenance) – Application Maintenance Support We are seeking an SAP PM Application Maintenance Support Specialist to provide ongoing production support, incident resolution, and minor enhancements for the SAP Plant Maintenance module. This role is focused on keeping the system stable and running smoothly for end users post-implementation, rather than new-build configuration — ideal for someone who enjoys troubleshooting, root-cause analysis, and continuous system improvement in a live production environment. Key Responsibilities Provide day-to-day L1/L2/L3 production support for the SAP PM module, resolving incidents within agreed SLAs Monitor, triage, and resolve tickets related to maintenance notifications, work orders, equipment master, functional locations, task lists, and maintenance plans Perform root-cause analysis (RCA) for recurring issues and implement permanent fixes or workarounds Support scheduled and unscheduled maintenance plan runs (batch jobs), background job monitoring, and troubleshooting of failed jobs Manage master data corrections and mass data changes (equipment, functional locations, BOMs, task lists) as needed Coordinate with cross-functional teams (MM, PP, FI/CO, PS) to resolve integration-related issues affecting PM processes Support period-end and year-end activities related to maintenance orders and settlements Maintain support documentation: known error database (KEDB), SOPs, FAQs, and root-cause logs Participate in on-call/rotational support as required, including handling P1/P2 critical incidents Support periodic system health checks, data consistency checks, and housekeeping activities Track and report support metrics: ticket volumes, SLA adherence, aging, and recurring issue trends 2-3 years of experience in SAP PM support (implementation experience is a plus, but not mandatory) Understanding of incident, problem, and change management processes (ITIL exposure preferred) Experience supporting SAP S/4HANA Asset Management environments Experience working in a managed services / AMS (Application Maintenance & Support) model Industry background in manufacturing, utilities, oil & gas, or facilities management Familiarity with batch job scheduling and monitoring in SAP Understanding of transport management (moving CRs through DEV → QA → PROD) Comfortable working in rotational/on-call support models Work Location: In person Work Location: Kuala Lumpur, M14, Malaysia Availability: Full time
Job Title: Engineer II, Facilities Company: Ansell SAP Module: SAP PM Roles & Responsibilities: Ansell is a world leader in providing superior health and safety protection solutions that enhance human well-being. As the need for better protection continues to grow, Ansell remains committed to researching, developing, and investing in innovative products and technologies that are marketed under trusted global brands. Operating across two business segments—Industrial and Healthcare—Ansell employs approximately 14,000 people worldwide and continues to grow as a market leader. Ansell is looking for Facility Engineer to be based in Ayer Keroh, Melaka. This position is Responsible for planning, implementing, and maintaining the infrastructure and equipment of buildings and facilities. Perform analyses of operational processes, resource allocation, energy use, and safety processes, and recommend and implement improvements. * Work for a global leader in the health and safety protection solutions industry. * A secure workplace with competitive remuneration and annual performance bonuses. * An inclusive, collaborative, and supportive work environment. * Exposure to a diverse and international workplace culture. What Will Your Role Be? * Gathering and analyzing data, blueprints, and reports. * Determining facility and equipment specifications. * Analyzing project costs and preparing budgets. * Designing and overseeing the implementation of facility expansion, layout, various systems, and quality controls. * Evaluating operational systems and facility infrastructure to ascertain and improve operational efficiencies. * Developing processing plans and optimizing resource allocation. * Planning and coordinating infrastructure and equipment maintenance schedules and activities. * Coordinating and overseeing contractors performing maintenance activities. * Ensuring compliance with relevant regulations, building codes, and health and safety standards. * Preparing reports and compliance documentation. * Supervising maintenance crew and developed the team in RCA and TPM skills. * Shift and “on-call” work during major crisis/breakdown. Be reachable by phone at all times. Work Locations ------------------ Work Location: Melaka, M04, Malaysia Availability: Full time
Job Title: Automation Engineer Company: Vale SAP Module: SAP PM Roles & Responsibilities: Responsible for Automation & Instrumentation maintenance and project activities. Evaluate all the maintenance event (breakdown and preventive demands) to propose solution and support maintenance process inspection, planning and execution to guarantee and improve equipment and system availability. Assist Maintenance Supervisor on preparing, compiling and analyse all document related to arrangement of Health, Safety and Environment Control and Monitoring, Sustaining of 5S maturity, Continuous Improvement activities through KAIZEN, VPS Compliance, Maintenance Work Order arrangement and allocation, validating control risk assessment, maintenance performance tracking, control and monitor for productivity and performance KPI. Compile all SOP / MOS (Method of statement) JSA, Job Safety Analysis and monitor Maintenance Service Contract as per Audit purpose, BMS Verification and monitoring: Ensures that contract planning to be submitted on time, Analyst cost & budget. Role Purpose: Improve on Electrical & Automation Maintenance efficiency thru KPI Control and monitoring for Safety, Productivity, Quality and Cost. Indirect: Cross-functional maintenance and operations teams during shift and shutdowns * Technical authority for automation maintenance and instrumentation activities across VMM operations. * Responsible for governance and performance management of outsourced automation contracts. * Influences automation system availability, maintenance effectiveness, and shutdown performance. * Leads automation reliability improvement initiatives and competency development programs. * Provides technical guidance for automation system upgrades, maintenance strategies, and continuous improvement projects. * Improve automation system reliability and availability while balancing production requirements, maintenance costs, and operational risks. * Develop sustainable local expertise and reduce dependency on external specialists through structured training and knowledge transfer. * Standardize automation maintenance across contractors and maintenance teams. * Drive a reliability culture through proactive maintenance, data-driven decision making, and root cause elimination. * Ensure quality and safety compliance during critical shutdown and major automation interventions. * Influence multiple stakeholders across Operations, Maintenance, Projects, Engineering, and Contractors without direct authority. * Continuously identify and implement innovative solutions to improve automation performance and reduce lifecycle costs * In the event of any unexpected issues; breakdown or critical situation, the job holder might be required to work beyond than the official working hours MAIN RESPONSIBILITIES * Act according to the ethical code of the company, passing the values to team. * Execute routine safety and technical inspections on equipment and execution of task on site. Assure the health and safety procedures for Vale employees and Business Partners trough Active Genuine Care * Participate in meetings on daily basis; Toolbox talk, Daily Manager FMDS meeting, Shutdown Progress Meeting and other meeting when required. * Support actions to achieve target of equipment availability and installations through maintenance activities for Automation & Instrumentation either by automation staff or contractors while comply to VMM HSE Procedures. * Compile, analyse, identify and updating FMDS and KPI monitoring on weekly basis for Safety, People, Productivity, Quality and Cost. * To compile and update all relevant document related to YPM ensuring it is according to plan and relevant to current situation while fulfil the maintenance and HSE requirement. Orientate, develop and teach technically the team in order to improve quality works and performance. * Assure maintenance knowledge through coordination, elaboration and update of the operational procedures, instruction and standards. Leading team to initiate MOC, MOS and JSA especially job awarded to contractor before sending a demand to planning team. To continuous review and revise all related document related to Automation and Instrumentation such as SOP, Work Instruction, JSA and etc. * + Assist supervisor to ensure all controls are being tested and working to guarantee that risks are monitored and controlled. Contribute in detection, report and eliminate of abnormalities in the operational process through control of the process variables, using quality tools such as Pareto, Failure Analysis, Loss Profile and Others that could be applied. * Assist on 5S initiative (Sort, Set in Order, Shine, Standardize, Sustain) methodology to maintain workplace to a set maturity. * Liaise with Planning team on maintenance plan (Offline, Opportunity and Shutdown) for Automation. Ensure scheduling and executing as per agreed plan to comply with department KPI. Execute initial control for new assets and follow maintenance engineering procedures. * Site verification for work to be performed during shutdown of equipment, based on the recommendations from Maintenance Plan and analyse of portfolios of services, priority setting and sequences in order to comply with Maintenance Plan. * Assist to implement Maintenance Management System and VPS implementation to adhere to all 14 element such as FMDS, DBM / DBO. * Assist engineering team to analyse equipment breakdown failures, proposing improvements initiative and lead to execute the corrective and improvement activities proposed. * Carry out responsibilities as Contract Inspector by review and validating all action taken and required action in monthly contract meeting. Manage contracts with third parties for maintenance service and spot maintenance support, controlling and applying Vale rules for contract management to assure quality of contracted service through monitoring of the fulfillment of the contractual works. * Develop analysis tools for decision making, as well as data to inform budgeting. Elaborate, controlling and guarantee the budget execution by giving support to the contract management. * Monitor the implementation of planned activities, noting deviations, to identify and propose improvements to be incorporated and adapted to future planning. * Lead for Kaizen activity (using PDCA mode) to improve team daily routine by providing communication to team and other parties especially planning and provide a proactive feedback process between the technicians and management. Develop improvement project taking care from the basic project, details engineering, execution, commissioning and test till ramp up. * Plan for training schedule with Training Centre, monitor expire date of all the staff under maintenance service. * Preventive Maintenance: To escalate and ensure all assets and equipment which require further maintenance treatment will be registered in SAP. The escalation of any maintenance treatment needed for all automation equipment to inspector and engineer as well as electrical head on the necessary action in term of immediate/ quick fix and long-term solution required to avoid any incident or failure of equipment. * Carry out additional duties, function and responsibility as directed or assigned by Management * PLC System* * VFD Technology* * Sensors Technology* * Belt Scale System* * Instrumentation technology – 3D scanner, sonar, radar, microwave* * VTS System* * Industrial network ( Ethernet, modbus, profibus, fiber optic )* * Reliability Engineering * Reliability-Centered Maintenance (RCM) * Root Cause Analysis (RCA) * Predictive and Condition-Based Maintenance * Asset Integrity Management * SAP PM / CMMS Systems * Shutdown Planning and Execution * Contractor and Contract Management * Health, Safety & Environment (HSE) Requirements * Technical Training and Competency Development * Continuous Improvement Methodologies Work Location: Lumut, M08, Malaysia Availability: Full time
Job Title: Automation Engineer Company: UPM SAP Module: SAP PM Roles & Responsibilities: What you will do * Develop, modify, troubleshoot, and maintain PLC, HMI, SCADA, VFD, and other automation control systems to support safe and efficient operations. Troubleshoot automation and electrical system failures, machine breakdowns, and facility-related issues. Perform root cause analysis (RCA) and implement effective corrective and preventive actions * Identify and implement continuous improvement opportunities to enhance equipment performance, reliability, energy efficiency, and overall operational effectiveness. Conduct routine inspections, condition monitoring, and performance assessments of production equipment, utility systems, and automation assets to ensure optimal reliability and availability * Support predictive, preventive, and corrective maintenance activities by providing specialized automation and electrical engineering expertise according to SAP PM, work order management and maintenance plan. Support energy management initiatives and ensure automation and electrical systems comply with applicable engineering standards, statutory requirements, and corporate guidelines * Perform technical feasibility assessments for automation and electrical system upgrades, including preparation of technical recommendations, justifications, and cost-benefit analyses for management review * Collaborate closely with Production, Maintenance, Quality, Engineering, and external service providers to resolve technical issues and achieve operational objectives. Provide technical guidance and knowledge sharing to maintenance personnel, technicians, and operators on automation systems, troubleshooting methodologies, and best practices. Participate in risk assessments for new and existing equipment, to improve workplace safety and regulatory compliance * Establish, maintain, and update engineering documentation within the M-File System, including automation architecture, electrical drawings, software backups, operating procedures, and system configurations. Maintain cybersecurity controls, backup strategies and Management of Change (MOC) documentation for automation and control systems. Ensure all engineering records, technical specifications, and system modifications are appropriately documented and controlled in accordance with company requirements * Provide automation and electrical engineering support for equipment modifications, upgrades, and new installation projects, including design review, system integration, commissioning, validation, and handover. Manage and support electrical installation, modification, and upgrading projects in compliance with standards, project requirements, budgets, and timelines Support Continuous Improvement (CI), Energy Saving, and Projects (MOP) through technical evaluation, implementation, and project execution. Coordinate with internal stakeholders, contractors, and vendors to ensure successful delivery of automation and electrical projects while meeting safety, quality, and performance objectives * A meaningful job: We have an inspiring purpose “We renew the everyday for a future beyond fossils”. Our work is impactful and transformative. * A caring community: Our community is built on great team spirit and shared commitment. We care about each other and the well-being of our colleagues. We support the work-life balance of all our employees. * Development opportunities: We offer you great opportunities to learn and grow throughout your career. We are an international, multi-business organization offering plenty of avenues for personal growth. * Responsible employer: Sustainability is at the core of everything we do. We are committed to ambitious, science-based sustainability targets in all areas, from climate change mitigation to enhancing biodiversity. We foster diversity and inclusivity, offering a work environment in which everyone can be themselves. For support with submitting your application, please contact the HR Service Center at careers@upm.com . Work Location: Johor Bahru, M01, Malaysia Availability: Full time
Job Title: Epitaxy Equipment Associate Engineer Company: OSRAM Opto Semiconductors (Malaysia) Sdn. Bhd., Penang SAP Module: SAP PM Roles & Responsibilities: The ams OSRAM Group is a global leader in innovative light and sensor solutions. As a specialist in Digital Photonics, we combine technological excellence with state-of-the-art global manufacturing capabilities to offer our customers the broadest portfolio of digital emitter and sensor technologies. Globally, our teams develop groundbreaking solutions aligned with societal megatrends like intelligent mobility, artificial intelligence, augmented reality, smart health, and robotics. Your new responsibilities * Responsible for the performance of Analytic & Metrology tools such as photo luminescence, Prober, Candela, XRD and other associated support tools in fab/fabrication. * Performing machine schedule maintenance activities in clean room and sub facility with closure SAP PM timely without any safety and quality issue. * Sustain the running of the equipment, daily monitoring of all machine & process parameters and addressing line operation issues, ensure the uptime of the equipment with establish and implement preventive maintenance.Perform troubleshooting of tool software and hardware part with application of measurement systems, daily SPC buyoff, also need to assist engineer's tasks in manufacturing and also development environment. * Transfer and start-up of new equipment, set-up procedure, hook-up, buy-off and qualification of new equipment together with process engineer as team, ensure processes and equipment are compliance to EHS policy. Support and perform continuous improvement project to identify equipment development potential, and support development activities together with engineers. * Maintain good 5S, maintenance work quality and safety, carrying out all task compliance to EHS and safety regulations with high sensitivity on safety requirement. Work Location: Kulim, M02, Malaysia Availability: Full time
Job Title: Custom Software Engineer Company: Accenture in India SAP Module: SAP PM Roles & Responsibilities: Project Role : Custom Software Engineer Project Role Description : Develop custom software solutions to design, code, and enhance components across systems or applications. Use modern frameworks and agile practices to deliver scalable, high-performing solutions tailored to specific business needs. As a Custom Software Engineer, a typical day involves designing and developing tailored software components that integrate seamlessly within larger systems or applications. The role requires continuous collaboration with various teams to ensure that solutions meet evolving business requirements. The work environment is dynamic, often involving iterative development cycles and the application of modern methodologies to create efficient, scalable, and high-quality software products that address specific organizational challenges. Roles & Responsibilities: * Expected to be an SME, collaborate and manage the team to perform. * Responsible for team decisions. * Engage with multiple teams and contribute on key decisions. * Provide solutions to problems for their immediate team and across multiple teams. * Lead efforts to identify and implement process improvements that enhance team productivity and software quality. * Mentor junior team members to support their professional growth and skill development. * Coordinate cross-functional communication to ensure alignment on project goals and deliverables. Work Location: Gurugram, Haryana, India Availability: Full time
Job Title: Plant Maintenance & Reliability Lead Company: Mondelēz International SAP Module: SAP PM Roles & Responsibilities: Job Description Lead Progressive Maintenance & Utility Internally, the role is designated as Lead Progressive Maintenance & Utility , responsible for driving plant maintenance excellence, equipment reliability, preventive and predictive maintenance, utilities management, and the Progressive Maintenance (PM) pillar under our IL6S framework. Are You Ready to Make It Happen at Mondelēz International? Join our Mission to Lead the Future of Snacking. Make It With Pride. ROLE PURPOSE As a member of the Plant Leadership Team (PLT), the Progressive Maintenance & Utilities Lead will lead the Progressive Maintenance (PM) Pillar within the Integrated Lean Six Sigma (IL6S) framework and drive the plant's journey towards a Zero Breakdown Culture. This role is responsible for building maintenance capability, improving equipment reliability, strengthening utilities performance, driving energy efficiency, and embedding world-class maintenance practices across the plant . The role is focused on coaching, capability building, and technical leadership rather than day-to-day maintenance execution. Your goal will be to ensure that the site manufacturing & support activities, without interruption, without any facilities shortages and/or any issues thereof. You will achieve 100% compliance to Local legal regulations, Quality, Health Safety & Environment management systems and standards. You are responsible for the management and maintenance of site facilities, buildings and equipment(s) (hardware & software). * Works cross functionally to develop and implement a strategic Facilities road-map and annual operating plan which is a competitive advantage to Mondelēz. Partner with internal & external stakeholders and service providers to define and meet Safety, Quality, Cost, Delivery, Sustainability, Engagement goals. Establish a strong governance to review & control Operational performance and continuous Improvement plan to deliver against best in class both internally and externally. * Lead and be accountable that Building Maintenance program, Facilities maintenance program capabilities, including maintenance repairs & overall operations are in place. Accountable to insure adherence to business continuity plan, manufacturing standards government regulations are understood by all employees/services providers at the site, regularly reviewed and monitored for effective implementation. * Provide leadership, coaching to Facilities team towards implementation of IL6S-Integrated Lean 6 sigma ways of working: delivering zero breakdowns via preventive/predictive maintenance strategies and technical mastery of maintenance and operation teams; PM (Progressive Maintenance) Pillar, and CBM (condition based monitoring), Visual controls & tools Mgmt., Lubrication mgmt. & Calibration of equipment(s) etc. * Role model Values and principles through effective coaching, mentoring and builds skills capability across the Plant technical/engineering team to engage with latest modern practices. Have a clear people succession and resource plan, for the asset & technology population , identifying and implementing critical levers to attract, retain and develop critical talent * Interface with key stakeholders internally and externally to develop and maintain effective relationships, align priorities in order to deliver the company objectives, and goals. * Strong operational & manufacturing leadership experience in CPG industry with experience in TPM-Total productive maintenance, 5s, LEAN, 6 sigma tools and concepts, Safety & GMP standards * An Engineer with a strong financial & business acumen, project management skills and Knowledge of industrial maintenance and manufacturing equipment, PM (Progressive Maintenance) expertise, Spare parts management, SAP PM module end user knowledge, Technology & Engineering automation basics. * Excellent communication (verbal & written), coaching, and leadership skills in a team-based environment. Demonstrated abilities in Analytics, problem solving and team building Key Responsibilities Progressive Maintenance Leadership * Lead the Progressive Maintenance Pillar and drive equipment reliability across the plant. * Establish and sustain preventive, predictive, and condition-based maintenance practices. * Drive breakdown elimination and continuous improvement initiatives. * Develop maintenance capability across engineering and operations teams. * Coach technical leaders and strengthen organizational expertise in reliability and maintenance excellence. * Support capability transfer through Autonomous Maintenance initiatives. * Improve equipment availability, maintenance effectiveness, and operational performance. * Lead root cause analysis and drive sustainable corrective actions. * Improve key reliability metrics including OEE, MTBF, and MTTR. Plant Leadership * Own maintenance and infrastructure budgets. * Support capital projects, plant expansions, and equipment investments. * Provide technical expertise to improve future plant design and asset reliability * Provide leadership across maintenance, utilities, electrical, instrumentation, and automation functions. * Ensure reliable and efficient operation of critical plant infrastructure and utility systems. * Support modernization, automation, and reliability improvement initiatives. WHY JOIN? This is a high-impact Plant Leadership Team role offering the opportunity to shape maintenance strategy , influence plant-wide performance, build technical capability , and drive world-class reliability and operational excellence Within Country Relocation support available and for candidates voluntarily moving internationally some minimal support is offered through our Volunteer International Transfer Policy Business Unit Summary Mondelez India Foods Private Limited (formerly Cadbury India Ltd.) has been in India for over 70 years, making sure our mouth-watering and well-loved local and global brands such as Cadbury* chocolates, Bournvita* and Tang* powdered beverages, Oreo* and Cadbury Bournvita* biscuits, and Halls* and Cadbury Choclairs Gold* candies get safely into our customers hands—and mouths .* Headquartered in Mumbai, the company has more than 3,300 employees proudly working across sales offices in New Delhi, Mumbai, Kolkata and Chennai and in manufacturing facilities at Maharashtra, Madhya Pradesh, Himachal Pradesh and Andhra Pradesh, at our global Research & Development Technical Centre and Global Business Hub in Maharashtra and in a vast distribution network across the country. We are also proud to be recognised by Avatar as the Best Companies for Women in India in 2019 – the fourth time we’ve received this award. Manufacturing support Work Location: Chennai, Tamil Nadu, India Availability: Full time
